PX2122
High-Output Dual 12-inch Two-Way
The PX2122 features a dual, ND2, two-inch voice coil, and one-inch, exit neodymium compression drivers.
Dual, DVX3121 12-inch, low-frequency transducers with forced air cooling l Long-throw 45 degree x 30 degree rotatable coverage pattern l 1,000-watt continuous (4,000-watt peak) power handling l Biamp-only operation l Very high sensitivity l 138 dB maximum SPL l Integral rigging points for eyebolts or optional rigging kit l Designed to be arrayed with two or more PX2122.
Dual, DVX3121 12-inch, low-frequency transducers with forced air cooling l Long-throw 45 degree x 30 degree rotatable coverage pattern l 1,000-watt continuous (4,000-watt peak) power handling l Biamp-only operation l Very high sensitivity l 138 dB maximum SPL l Integral rigging points for eyebolts or optional rigging kit l Designed to be arrayed with two or more PX2122.
Specifications
| Frequency Response (-3dB) | 80 - 15000 Hz |
| Frequency Response (-10dB) | 60 - 19000 Hz |
| Sensitivity 1W/1m | 102 dB |
| Max. SPL/1m (calc); half space | 138 dB |
| Coverage (nominal -6dB) H° | 45 ° |
| Coverage (nominal -6dB) V° | 30 ° |
| Rotatable Horn | Yes |
| Low Frequency Power Handling (continuous/program/peak) | 1000/2000/4000 Watts |
| High Frequency Power Handling (continuous/program/peak) | 80/160/320 Watts |
| LF Transducer | (2) DVX3121, 12 in (305mm) Driver |
| HF Transducer | (2) ND2-16, 2 in (50mm) Diaphragm Compression Drivers |
| LF Nominal Impedance | 4 Ohms |
| HF Nominal Impedance | 8 Ohms |
| Enclosure Material | 18mm Plywood with Black EVCoat |
| Grill | Polyester Powder Coated, 16GA Galvanized Steel, with Rotatable Logo |
| Color | Black |
| Flying | Optional |
| Input Connections | Parallel Neutrik® NL4 |
| Outdoor | No |
| Chassis Size | 12 inches |
| Internal Crossover | No |
| Speaker Type | Fullrange, Mid-High, Two-Way |
| Weight Net | 50.1 kg ( 110.45 lbs ) |
| Dimensions (HxWxD) | 1219 x 457 x 445 mm (47.99" x 17.99" x 17.52") |
Related Press Releases
Downloads
Related Products
CP3000S
Electro-Voice’s new Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a new compact, lightweight format made possible by a highly efficient Class-H design, which generates considerably less heat. The CP3000S is not only the first Precision Series amplifier to use a switch-mode power supply, but also the first switch-mode amplifier with EV’s Precision Series sound. With up to 2x1600 watts into two ohms, and 2x1100 watts into four ohms, and only 17.96 lbs (8.15 kg), it is both powerful and lightweight. The CP3000S is state-of-the-art and can be used for any application. It is specifically designed to allow for long-term driving of low loads into subwoofers without stress. The CP3000S's combination of reliability and pleasing, rich sound make it the the first choice for all mid and hi-range speaker cabinets.
Dx38
The Dx38 is a two-in, four-out loudspeaker processor. A dynamic range of 115 dB, for highest audio performance; 48-bit filter algorithms 24-bit A/D and D/A conversion. Real-time control and configuration via front panel or PC interface with RACE software supplied. RS-232, MIDI interfaces are standard. RS-485 bus for networking is optional. Contact-closure interface is optional.
PX2181
The PX2181 features a dual, horn-loaded, DVX3180 18-inch, low-frequency transducers with forced air cooling. 1,000-watt continuous (4,000-watt peak) power handling l High-efficiency, horn-loaded design l Dual and parallel mode selectable l Very high sensitivity l 141 dB maximum SPL l Integral mounting points on rear panel for optional wheel and caster kit l Enclosure is stackable in both horizontal and vertical orientations.
