SxA Series

The new Electro-Voice® SB2A is a powered, 12-inch subwoofer that eliminates the need for external system processing and amplification, and addresses the demand for lightweight, high-performance, portable sound systems.The SB2A features dual, 350-watt amplifiers, and switchable, powered speaker output that can drive either an external, eight-ohm, passive subwoofer or full-range loudspeaker. The SB2A is a supremely versatile and compact “sub system drive” solution that can easily configured with a variety of loudspeakers for a multitude of sound reinforcement applications. The SB2A can function in many different setups - with a ZX1-90, as a standalone PA that fits in the front seat of your car, in clusters with SX100/300, with a passive SB122, as a lightweight sub extension replacement for bulky, 15-inch, two-way systems (two 16 kg packages vs. one 40 kg package), or with an additional powered top box (such as the SXA100+). The SB2A shares the same durable, injection-molded enclosure as the popular, passive, EV SB122 subwoofer. Both utilize the EV S12S woofer, designed from the ground up for optimized performance within this small footprint enclosure.

The Electro-Voice® SxA100+ sets a new standard for powered speakers. Its design provides users multiple inputs with mix capability, an easy-to-use EQ section, and loads of power in a compact, attractive package. The SxA100+ is a full-range loudspeaker ideal for most applications that require high-quality sound. The system has been designed with careful attention to the dynamic requirements of music to provide high SPL without excessive heat. The high-quality microphone preamplifier provides great sounding vocals and speech. A master level control sets the desired SPL, and line input can be mixed and balanced with a microphone with a level control. The SxA100+ features linear response that can be easily optimized for speech or music with onboard, multiband equalization.

The SxA250 is a compact, 15-inch, two-way, powered loudspeaker system, which can be used as a front-of-house system or as a floor monitor. The system features separate mic and line inputs with mix capability, a 350-watt, dynamic, low-frequency power amplifier, an 80-watt, dynamic, high-frequency power amplifier, and low and high-frequency shelving equalization. The SxA250 allows line output to provide cascading signals to additional speakers. With an 80 degree x 55 degree Constant Directivity horn, the system can maintain a 126 dB maximum output. Its enclosure is built from 18 mm plywood and finished in Futura, a baked-on polyurethane finish that is extremely durable. Comes with a metal stand-mount and can be safely suspended using an optional SK-1 hardware kit. Only 49 lbs (22.3 kg).

Best described as a hot-rodded, powered SX300, the Electro-Voice® SxA360 boasts 1000 watts of peak power in a rugged yet lightweight chassis. With a 2-inch diaphragm compression driver and the legendary DL12BFH woofer used in hundreds of thousands of systems worldwide, the SXA360 not only has power to spare, but also sounds amazing.Key Features: 1000 watts peak power from dual power amplifier channels each driving 500 watts into 4 ohms l Incredibly lightweight package 16.6kg (36.6lbs) l Amplifiers contain electronic crossover circuitry and Constant Directivity horn compensation optimized for speaker components l A limiter circuit prevents amplifiers from clipping, while preserving sonic quality l 2-inch diaphragm compression driver l The line input utilizes Neutrik® "combo” connectors, which accept either .25-inch or three-pin, XLR-type connectors l Separate line output is a three-pin, XLR-type, balanced, low-impedance output that can be used with long cable runs l The SxA360 is perfect for use as a powered floor monitor.