One moment please while we configure Electro-Voice.com for you...
Electro-Voice.com

Welcome to Electro-Voice.com. Please specify your country so we can customize your experience.

The Americas
amer
Asia & the Pacific Rim
apr
Europe,
the Middle East, & Africa
emea
cn
lam
Access to this file requires a registered account. Log in or use the link below to register an account.

CPS 2.12 MK II

Contractor Precision Series Class-H Power Amplifier

  • CPS 2.12 MK II
Designed for the contractor, the CPS 2.12 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers, the CPS 2.12 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.

  • Up to 2 x 2400 W into 2 ohms
  • Phoenix-type input and output connections
  • Remote power-on/off contact
  • Rear-mounted attenuators
  • Programmable time for custom power-on delay settings
  • Module slot for optional RCM-810 card, allowing <a href="http://irisnet.electrovoice.com/">IRIS-Net</a>t control and monitoring
  • Switchable 50 Hz high-pass filter
  • Three-stage front-to-rear fans
  • Class-H design
  • Complete protection package
Amplifier Gain 32 dB
Analog Inputs 2, electronically balanced, Phoenix-type
Audio Network No
CAN Bus Interface Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 2Ω 1800 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 1200 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 750 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 1100 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 550 Watts
Cooling Front-to-Rear, 3-stage-fans
Crossover Type Modular
DIM 30 0.05 %
Electronics Type Amplifier
Frequency Response 10 Hz - 40 kHz ±1 dB
Impedance 2/4/8 Ω
Input Impedance (Balanced) 20 kΩ
Input Sensitivity +6.6 dBu (1.66 Vrms)
Intermodulation Distortion (SMPTE) 0.1 %
Mains Voltage 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured)
Maximum Bridged Output 4Ω 3600 Watts
Maximum Bridged Output 8Ω 2400 Watts
Maximum Input Voltage +21 dBu (8.69 Vrms)
Network Control (IRIS-Net) Optional (RCM-810 card)
Slew Rate 30 V/µs
Topology Class-H
Total Harmonic Distortion 0.03 %
Variable Load Drive (VLD) No
Height 2RU 88.1 mm (3.47")
Width 482.6 mm (19")
Depth 421.5 mm (16.59")
Weight Net 17.7 kg (39.02 lbs)
RCM-810

RCM-810

IRIS-Net remote control module for CPS Series amplifiers
UCC1

UCC1

Remote control interface for IRIS-Net
Optional accessories
may be shown
Hover over image to zoom
Click image for full size
News & Media
Check out more News & Media content
Knowledge & Support
Technical Support Group
Tel: (866) 782-8346
audiosupport@us.bosch.com

Warranty Information