TG5

2000 W per channel power amplifier

  • High-level touring performance
    Rugged, lightweight package
    2000 W per channel (2 Ω)
    Grounded Bridge Class-H design
    Switch-mode power supply
    Microprocessor-controlled
    Front LCD panel for operation-mode setup and monitoring
    Slot for optional RCM-26 IRIS-Net-compatible DSP and control module
    11-level protection package
    Only 31.4 lbs (14.2 kg)

Specifications

A/D Conversion 24 Bit linear, Sigma-Delta, 128 times oversampling
Amplifier Gain 39, 35, or 32 dB
Analog Inputs Yes

Specifications

CAN Bus Interface 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control)
Channlels 2
Continuous Rated Power (1 kHz, THD 1%) 2Ω 2000 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 1450 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 850 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 1200 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 600 Watts
Control Protocol CAN-Bus (with RCM 26 module)
D/A Conversion 24 Bit, Sigma-Delta, 128 times over-sampling
Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing
Depth 512 mm
Digital Inputs Optional with RCM-26
DIM 30 0.02 %
Electronics Type Amplifier
FIR-Drive Optional with RCM-26
GPIO Control Ports 1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND)
Height 88.1 mm
Impedance 2/4/8 Ω
Input Impedance (Balanced) 20 kΩ
Input Sensitivity 0 dBu / +6 dBu / +7 dBu
Intermodulation Distortion (SMPTE) 0.05 %
Internal Processing 2 DSPs (150 MHz, 300 MIPS)
Maximum Bridged Output 4Ω 3800 Watts
Maximum Bridged Output 8Ω 2900 Watts
Network Control (IRIS-Net) Optional with RCM-26
Power Consumption 1000 W
Power Supply 100 - 240V, 50 - 60 Hz
Sample Rate 48 kHz
Sample Rate Conversion (SRC) 32 kHz - 192 kHz, internal Sample-Rate- Converter
Signal-to-Noise Ratio (A-weighted) 109 dB
Slew Rate 30 V/µs
Topology Class-H grounded bridge
Total Harmonic Distortion 0.05 %
Weight Net 14.2 kg
Width 482.6 mm

Similar Products

TG7
3500 W per channel power amplifier

Support

Solutions

News Stories